Type No. 221­113­011

The Linear Actuator OEM has been designed and developed to fulfill highest demands of modern motorsports in terms of performance as well as durability. Special focus has been put on enabling the unit to work under harsh conditions.

The unit has been designed to suit a broad range of applications such as wastegate actuation, variable turbine geometry or other applications requiring a performant linear actuator. Different mechancial adapters or application software solutions than the one shown are possible, please contact us for your bespoke solution!

Maximum actuation range is 17mm with a maximum dynamic force of 500 N with a maximum static load of 300 N.


Operating voltage: 13.5..15.6V nom.
Standby current: 0.5 A
Peak current: 50A
Circuit Breaker: not integrated, optionally use external breaker
Dimensions: approx. 75 x 70 x 112 mm (@ center position)
Weight: approx. 430g
Mechanical Resolution: < 0,05 mm Max Speed: 200 mm / sec.
Max. actuation range: 20mm
Operating actuation range: 17mm
Deutsch 22 pin, flange mounted : AS212-­35PN
Deutsch 22 socket, loom side: AS612­-35SN
Ambient: ­-25 °C … +100 °C
Unit: ­-25 °C … +100 °C
Recommended unit operating temperature: ­0 °C … +80 °C

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.