With the E­Shift Actuator GT, MEGA­Line once again redefines the state of the art of modern
gearshift systems! Like its sibling, the E­Shift Barrel OEM, the E­Shift Actuator GT is an e­motor powered direct drive gearbox barrel actuator.Besides replacing all pneumatic gearshift components incl. piping, also the ratchet mechanism of the sequential gearbox becomes obsolete by utilizing the E­Shift Actuator GT.

Considering the unit weight of only approx. 850g, the aggregated system weight is likely less than the standalone gearbox weight incl. ratchet. Besides this significant weight reduction the E­Shift Actuator GT offers several new features and benefits over a any pneumatic gearshift system:

  • Significantly increased position accuracy
  • Possibility to achieve a neutral position between each gearpair (for easy disengagament of the drivetrain e.g. for coasting etc.)
  • Different shift strategy per gearpair

The intelligent actuator includes active motor position control as well as the gear­pot. All relevant communication with the engine ECU is realized via CAN with an optional hard­wired “UP” and “DOWN” input available for use.


Operating voltage: 13.5..15.6V nom.
Standby current: 0.5 A
Peak current: 60..100A programmable
Circuit Breaker: not integrated, optionally use external breaker (e.g. ETA, 452 K34 FN2 – 80A)
Dimensions: L x W x H approx. 111 x 95 x 89 mm
Weight: approx. 850g
Angle of rotation: 360°
Angle error: less 0.1°
Spline: similar DIN 5480
Deutsch 13 pin, flange mounted: AS01035PN
Deutsch 13 socket, loom side: AS61035SN
Ambient: 25°C … +80 °C

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.