GDI High Flow Pump HPFP-45 for 2018 Mustang GT 5.0

GDI High Flow Pump HPFP-45 for 2018 Mustang GT 5.0

This GDI high pressure pump was developed to replace the Denso OEM high pressure pump. It delivers up to 45% more fuel flow when mounted on the same CAM-Lobe.
Maximum Fuel Pressure is 250bar / 3625psi (OEM 200bar/2900psi).
The kit comes with everything you need: the HPFP, all required hardware and an electric pigtail.
Customer-specific fittings and lines on request.

Straight E85 1194whp GDI/PFI combined !!!

no meth, no PFI, no extra ECUs, no wiring, full control, full OBD Diagnostics.

45% over OEM




Maximum Rail Pressure 250bar / 3625psi (OEM 200bar / 2900psi)

Fuel Compatibility: all known fuels, all Ethanol blends

Electric Connector: Bosch Compact 2-pin

Driver Profile: XDI, tuning changes needed

Accessories: electric pigtail

Geometric Volume
1.77cc / rev
(OEM 1.22 > +45% capacity)

Maximum Flow Rate:

Housing material: stainless steel, hard coated Aluminum

Tuning Support:  Standalone, SCT, HPT

Dry Weight: 1112 g

Additional information

Weight 4 lbs
Dimensions 7 × 5 × 5 in

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.