GDI High Flow Pump XDI-HPFP for F150

GDI High Flow Pump XDI-HPFP for F150

Our GDI high pressure fuel pumps were developed to replace the Denso OEM high pressure pump.
They deliver up to 80% more fuel flow (with upgraded low pressure fuel system).
Maximum Fuel Pressure is 250bar / 3625psi, this is 66% more than the OEM pump at 150bar.
The kit comes with the HPFP and an electric pigtail. Installation takes less than an hour for HPFP35/60 ! XDI-HPFP80 requires a camshaft change.

Straight E85 GDI only !!!

no meth, no PFI, no extra ECUs, no wiring, full control, full OBD Diagnostics.

35% over OEM




Maximum Rail Pressure 200bar / 2900psi (XDI-HPFP35)

250bar / 3625psi (XDI-HPFP60 / HPFP80)

Fuel Compatibility: all known fuels, all Ethanol blends

Electric Connector: Bosch Compact 2-pin

Driver Profile: XDI, tuning changes needed

Accessories: electric pigtail

Geometric Pump Capacity
1.51cc (HPFP35) bolt on pump
1.81cc (HPFP60) bolt on pump
2.21cc (HPFP80) HPFP60 plus custom camshaft

Maximum Flow Rate:
240LPH (HPFP35)
290LPH (HPFP60)
320LPH (HPFP80)

Housing material: stainless steel, hard coated Aluminum

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.