GDI High Flow Pump XDI-HPFP35 for Ford Taurus SHO

GDI High Flow Pump XDI-HPFP35 for Ford Taurus SHO

This GDI high pressure pump was developed to replace the Bosch OEM high pressure pump. It delivers up to 35% more fuel flow when mounted on the same CAM-Lobe.
Maximum Fuel Pressure is 200bar / 2900psi (OEM 150bar/2150psi).
The kit comes with everything you need: the HPFP, base plate, E85-proof inlet hose with AL-fittings and an electric pigtail.
You can chose provisions for Ethanol Sensor at no extra cost when specified ahead of time.
Customer-specific fittings and lines on request.

Fueling the world’s fastest and quickest SHO at 11.0sec (Jordan Randle, AJP tuned).
E30, 510 all wheel hp (Gearhead tuned)

no meth, no PFI, no extra ECUs, no wiring, full control, full OBD Diagnostics.

Clear
Qty:

Description

APPLICATION
Maximum Rail Pressure 200bar / 2900psi (OEM 150bar / 2150psi)

Fuel Compatibility: all known fuels, all Ethanol blends

Electric Connector: Bosch Compact 2-pin

Driver Profile: XDI, tuning changes needed

Accessories: electric pigtail

MECHANICAL DATA
Geometric Volume
1.52cc / rev
(OEM 1.12 > +36% capacity)

Maximum Flow Rate:
tbc

Housing material: stainless steel, hard coated Aluminum

Tuning Support:  Standalone, SCT

Dry Weight: 1112 g

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.