GDI High Flow Pump XDI-HPFP35 for Ford F150 3.5EB Gen2 / Raptor

GDI High Flow Pump XDI-HPFP35 for Ford F150 3.5EB Gen2 / Raptor

This GDI high pressure pump was developed to replace the Bosch OEM high pressure pump. It delivers up to 63% more fuel flow when mounted on the same CAM-Lobe.
Maximum Fuel Pressure is 200bar / 2900psi with the HPFP60 250bar / 3625psi
The kit comes with everything you need: the HPFP, base plate, hardware and an electric pigtail. It is a true bolt on solution, factory inlet and High Pressure line fit.
The swap can be done in your garage without any special tools.

Customer-specific fittings and lines on request.

World Record F150: 11.59sec, 116MPH, with our XDI-HPFP35

World Record Navigator: 12.85sec, 104MPH, with our XDI-HPFP60 


no meth, no big port injectors, maximum DI blend, best driveability



Maximum Rail Pressure
HPFP35: 200bar / 2900psi (like OEM)
HPFP60: 250bar / 3625psi (25% over OEM)

Fuel Compatibility: all known fuels, all Ethanol blends

Electric Connector: Bosch Compact 2-pin

Driver Profile: XDI, tuning changes needed

Accessories: electric pigtail

Geometric Volume
OEM 0.897cc / rev
HPFP35: 1.22cc / rev = 36% increase
HPFP60: 1.46cc / rev = 63% increase

Maximum Flow Rate:

Housing material: stainless steel, hard coated Aluminum

Tuning Support:  Standalone, SCT, HPT

Dry Weight: 1112 g

Additional information

Weight 4 lbs
Dimensions 7 × 5 × 5 in

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.