Ford 2.7 and 3.0 Eco Boost (Nano)

Ford 2.7 and 3.0 Eco Boost (Nano)

This GDI high pressure pump was developed to replace the Denso OEM high pressure pump.
It delivers up to 45% more fuel flow when mounted on the same CAM-Lobe.

Maximum Fuel Pressure is 200bar / 2900psi with the HPFP60 250bar / 3625psi
The kit comes with everything you need: the HPFP, base plate, hardware and an electric pigtail.
It is a true bolt on solution, factory inlet and High Pressure line fit.
The swap can be done in your garage without any special tools.

Customer-specific fittings and lines on request.

World Record F150 2.7EB: coming soon !!
World Record Edge Sport: coming soon !!
World Record Fusion Sport: coming soon !!

no meth, no port injection, best drive-ability and power



Vehicle Applications

2015–2017      Ford F150 2.7
2016–2018      Lincoln MKX 2.7
2017–               Lincoln Continental 2.7
2019–               Lincoln Nautilus 2.7
2015–2018       Ford Edge Sport 2.7
2019–               Ford Edge ST 2.7
2017–               Ford Fusion Sport 2.7
3.0L engines on request

Maximum Rail Pressure
HPFP35: 200bar / 2900psi (like OEM)
HPFP60: 250bar / 3625psi (25% over OEM)

Fuel Compatibility:
all known fuels, all Ethanol blends

Electric Connector: Bosch Compact 2-pin

Driver Profile: XDI, tuning changes needed

Accessories: electric pigtail

Geometric Volume
HPFP35: 1.51cc / rev
HPFP60: 1.81cc / rev

Maximum Flow Rate:

Housing material: stainless steel, hard coated Aluminum

Tuning Support:  Standalone, SCT, HPT

Dry Weight: 1112 g

Additional information

Weight N/A
Dimensions N/A

Supporting Material

California Proposition 65

 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.